In my previous blog post I introduced two of Don Reinertsen’s books and explained how they contained dozens and dozens of great ideas around Lean and Flow principles. Either of those books would keep you busy for a long time and have enough content to make great improvements in any new product development process. But as good as they are, we found a couple other sources that contribute greatly to the big impact as well. First here are 7 Lean Principles.
These principles give us the first level benefits of visibility, communication, fast feedback, no multitasking, and early warning of delays.
If you combine the key points from Agile and TOC in this blog post, and the key points from Don Reinertsen’s books in my previous blog, you can see why we selected these as driving principles of Playbook and how they benefit Lean Development teams.
And all of those combine to give every team member clear and correct priorities each day…
Which means that projects are consistently completed 30-50% faster!
So where do these principles come from?
Eric covered the difficulties in applying Agile methods to hardware product development in a previous blog series, but one of the Scrum methods that did translate well is the practice of daily (or frequent) standup meetings. Teams meet in front of a visual project board full of sticky notes that represent the tasks they are working on.
This approach has several benefits.
Communication – If you meet daily, any new issue is communicated to the team within twenty-four hours instead of in a week (or two) at the project status meeting.
Visibility – Only when all of the work in the system becomes visible can you begin to manage it. And systems loaded to high capacity states have very long cycle times. However, by managing WIP (work in progress) you can reduce loading and keep the active work flowing much faster. And you can see and monitor it at the daily meetings.
Focus – If you’re visibly managing the number of active tasks, and have made commitments to your teammates, you’re highly discouraged from multitasking—which is one of the worst forms of waste in most product development environments. (Not to mention that it literally lowers your IQ…!)
So at the end of the standup meeting, everyone has clear priorities for the day. (Clear priorities are a great accomplishment! But be careful—without Playbook, those “clear” priorities might not actually be “correct” priorities…)
The other major source of methods for Playbook is Theory of Constraints (TOC). TOC was introduced to us by Eli Goldratt in his book The Goal way back in 1984. Even though the methods were quite different than Lean, many manufacturers used them to improve operations at the same time as many other manufacturers were adopting Lean. The fact that the book sold over six million copies attests to its popularity. But one of the topics developed from TOC that interested us was Critical Chain Project Management (CCPM).
At a very high level, CCPM does a few things differently than traditional project management. One of the first steps is to “load level” the team members. This makes sure they don’t have more work than they can do in a given period of time. (Obviously, right?!)
It also uses the concept of project buffers. Instead of each person adding their own buffer to their estimates, the task durations are “best case” and a shared buffer is created at the end
This shared approach works great in the uncertain world of hardware product development because it’s difficult to accurately predict how long things will take. And, besides the inherent uncertainty in a task duration, there are two additional causes of work taking longer than planned.
First, Parkinson’s Law tells us that work fills up to take the time allotted. And second, Student Syndrome explains that people (not just students!) usually don’t focus on something until right before it’s due.
The advantages of CCPM are that the plan is more accurate, team members are bought into it, and overloading and multitasking are reduced.
Next week I’ll cover some of the biggest challenges most companies encounter on their journey into Lean Product Development, and then the keys to success. Be sure to subscribe to this blog to get the rest of the story!
-----
If you are ready to see how these principles are supported in Playbook, watch this video and take a product tour.
Guide to Lean Project Management
Guide to Lean Product Development
Science and economics behind “failing fast”
Lean Product Development the Opportunity of the Century
Lean Product Development Case Study
Principles of Lean Product Development
Lean Product Development Value Chain
Get started with Lean Product Development
Lean Product Development: Cultural Resistance
4 ways to Ensure Your Lean product Development Initiative Won't Fail